|
 |
SWR |
| FENDER FAN APPRECIATION DAYS SATURDAY NOVEMBER 28TH & MONDAY NOVEMBER 30TH! GET AN ADDITIONAL 10% OFF ANY SWR AMP OR CAB! Innovative cabinets and amps from one of the industry's premier bass gear manufacturers. Contact us for current inventory. We will meet or beat any advertised price! |
SWR Goliath III 410
The one, the only, the original. They laughed when the Goliath 4x10 was introduced in 1986 – why put a horn tweeter in a bass cabinet? Don’t you need larger speakers for full range response? Twenty years and tens of thousands of units later, it’s the most copied bass speaker cabinet in the world. The Goliath III lives up to and goes beyond the intent of the original: A true high-fidelity 4x10/tweeter horn cabinet with very tight, focused low-end response and great dynamic capability, bringing out the best in your instrument across the entire frequency spectrum. With crystal highs, thunderous lows, and gut-punch midrange, this is the definition of full range. The only thing better than a Goliath is two of them in a stack … or four in two stacks … or ...
Features: 4x10 enclosure, 700 watts handling, custom SWR speakers, horn tweeter with attenuator, dual Speakon® and 1/4” speaker jacks, removable casters, side spring-loaded handles, vibration-free shock-mounted chrome grill, front slot port. Impedance: 8 ohm model available.
$849.99
|
|
SWR SM500 amp
An amp bass players have loved for its tonal versatility has been updated with even more special features. It offers a tube (12AX7) front end; dual independent inputs for passive or active basses; gain with LED clip indicator; variable limiter; aural enhancer; bass, treble, and transparency controls; a 4-band graphic EQ; effects blend, stereo master volume; speaker on/off switch; side chain loop; tuner output; balanced XLR out with select switch direct mode, ground lift, and pad control; and bridge or stereo mode switching. Bridged mono: 500W @ 4 ohms, 400W @ 8 ohms, 250W @ 16 ohms (minimum load 4 ohms). Stereo: 300W per side @ 2 ohms, 250W @ 4 ohms, 150W @ 8 ohms (minimum load 2 ohms). 19"W x 3.5"H x 13.375"D. 20 lbs.
$1,199.00
|
|
SWR Workingpro 700 amp
Bass Sound That's Loud and Proud! It's SWR's newest big-gig powerhouse, the WorkingPro 700 - an amp that works as hard as you do! Loud and proud at 700 watts, and packed with new features and professional, time-tested SWR tone, the WorkingPro 700 is destined to become the newest classic SWR amplifier. The lightning-quick solid-state preamp and renowned Aural Enhancer circuitry provide natural warmth and crystal clarity, while the 3-band active EQ lets you dial in your tone in seconds flat. Then add in the brand new, exclusive Bass Intensifier - which literally thickens the low-end response at the frequency range of your choice - and you've got an amp that will last you through gigs of any size and style. Get into the WorkingPro 700 and get some respect!
$799.00
|
|
SWR Workingpro 10 Combo
The SWR WorkingPro 10 is the smallest member of the WorkingPro family, but don’t let that fool you!
The WorkingPro 10 delivers 100 watts at 4 ohms in what amounts to a mini-thunderstorm. With a single 10-inch speaker, piezo tweeter and tilt-back legs, this easily-portable little baby is great for small gigs and practicing. Features
1x10-inch Eminence® speaker, Le Son® TLX-1e tweeter horn, SWR® preamp with: Aural Enhancer™, Bass Intensifier™ circuit, Wedge EQ circuit, Side-mounted monitor input jack, 3-Band Active EQ, Tilt-back cabinet, Headphone jack
Effects Send & Return, Unbalanced 1/4-inch & Balanced XLR Lines out.
$399.99
|
|
SWR Marcus Miller Preamp
Just arrived! Marcus Miller and SWR partnered to design a preamp with many unique qualities: Classic SWR tube preamp fueled by a 12AX7 dual triode tube, 2 selectable front panel inputs plus one rear panel input to accommodate easy instrument changes, 3-band semi-parametric EQ with sweepable mids, SWR-exclusive Aural Enhancer tone-shaping circuit (custom voiced by Marcus Miller) with pull defeat option, Bass Intensifier circuitry for added low-end thickness, Boost feature with Volume control and Compression Blend, Studio quality compressor with pre or post EQ "Comp Position" switch, All-tube studio quality Direct Out, Side-chain Effects Loop with Blend Control, Selectable Line Out for tube DI, Post EQ or Compressor position Out, plus Level control, Phase and Ground Lift switches, Footswitch with 4 selectable features (Bass Intensifier, Boost, EQ Bypass & Effects Loop Engage). 5 year transferable warranty. Check Marcus' video going into more detail about the MM preamp at www.swramps.com I saw Marcus demo this preamp at the Nashville NAMM and it captured the Marcus Miller tone.
$845.00
|
|
SWR Golight Marcus Miller 410
The Marcus Miller golight 4x10. This model features a sealed (non-ported) 4x10 enclosure for additional midrange “punch,” 800 watts handling, custom SWR neodymium speakers (selected by Marcus Miller himself), horn tweeter with attenuator, Speakon® and 1/4” speaker jacks, removable casters, side handles, vibration-free shock-mounted grill. 56 lbs. (25.4 kg) Impedance: 4 ohms.
$899.00
|
|
SWR Goliath 410 ORIGINAL SERIES EDEN
THESE CABS ARE VERY RARE! Used Orginal series SWR Goliath 410 Bass Combo Amp in excellent shape. Designed by David Eden. This extremely rugged cabinet is constructed of high grade wood, stamped steel vibration-free grill, and a Metal Input Panel. Other Features Include 1/4" input and output, Speakon Jack, a Horn Protection Circuit, and Removable Casters. Dimensions: 23 x 25.25 x 18.375", 89 lbs, 8 ohms. 8 Ohm, 700 Watts. Free Shipping included!
$640.00
|
|
|
|
|
|
